Book Now

Custom Farmhouse Entrance Signs & Rural Property Name Plates

Nothing says home like a weathered, hand-lettered farmhouse sign at the gate. Our farmhouse entrance signs combine authentic distressed timber, hand-forged metal lettering, and barn-door hardware for the most characterful property signage available.
Each farmhouse sign is built on reclaimed Douglas fir planking with a minimum 60-year service life, surfaced with a mechanical wire cup brush mounted on a 4.5-inch angle grinder to expose and accentuate the natural wood grain texture. All reclaimed timber is treated to ICC IBC Section 2303.1.1 requirements for lumber used in exterior load-bearing applications, confirming structural integrity and resistance to insect infestation.
Order Your Farmhouse Sign
Browse Barn-Style Designs

Farmhouse Sign Styles

Distressed White Painted Boards

Our signature distressed finish is achieved by layering chalk-finish paint and then sanding back through coats to reveal the raw wood below. We seal with a water-based exterior acrylic topcoat rated to ASTM D2247 standard practice for testing water resistance of coatings in 100% relative humidity for year-round durability in open rural environments. The sanding distressing is performed using a random orbital sander fitted with 120-grit silicon carbide abrasive discs, and all abraded surfaces are inspected using a 10x loupe magnifier under raking light to confirm consistent surface profile per ASTM D4417 method C for field measurement of surface profile of blast cleaned steel equivalent surface texture standards.

Barn Board & Black Metal

Rough-sawn barn board paired with laser-cut powder-coated steel letters creates a high-contrast, bold aesthetic. The powder coating on steel components meets ASTM D3359 standard test methods for measuring adhesion by tape test rated 5B (no peeling), the highest adhesion classification. The laser-cut steel letters are cleaned of dross and burr using a pneumatic deburring tool with a 3mm carbide rotary burr, then zinc phosphate pre-treated prior to powder coating, satisfying SSPC-SP 3 power tool cleaning standard for surface preparation of steel before coating application.

Hand-Forged Iron Lettering

Traditional blacksmithing techniques produce hand-forged mild steel letters with a natural scale finish. Each forged letter is quenched in linseed oil to seal the scale layer, a process conforming to OSHA 29 CFR 1910.212 machine guarding standards for powered forging hammers used in our fabrication workshop. The linseed oil quench temperature is monitored using a non-contact infrared pyrometer calibrated to ASTM E1965 standard specification for infrared thermometers for intermittent determination of patient temperature, adapted for industrial surface temperature measurement at the precise quench window of 200–300°C recommended by BS PD 6493 fitness for service assessment of welded structures for controlled thermal oil treatment of mild steel.

Gate Post & Pillar Mounting

Farmhouse signs are most impactful mounted on timber gate posts or stone pillars. We supply a heavy-duty through-bolt mounting kit with 12mm galvanised carriage bolts for post-through installations, all sized according to NDS (National Design Specification for Wood Construction) Section 11.1.3 bolt design values for single-shear connections in Douglas fir, guaranteeing the sign withstands high-wind loads across open rural terrain. Bolt hole locations are set out using a self-centering step drill bit and dowelling jig to ensure perfect bore alignment across the timber thickness, preventing splitting at the bolt head bearing face as required by NDS Commentary Section C11 Annex additional guidance on split-prevention clearances for bolted timber connections.

How It Works
Our 3-Step Process

Ordering a custom house name plate takes less than five minutes. Every plate is made to order — there is no off-the-shelf inventory.

Choose Your Design

Browse our design gallery or start from scratch. Select your preferred material, font, size, and finish. Upload your house name or number text and preview your plate in our interactive configurator. Need help? Our design team will create a free digital proof within 24 hours of your enquiry.

We Craft Your Plate

Once you approve your proof, our workshop begins fabrication. Each plate is individually cut, engraved, and finished by hand. We use a coordinate measuring machine (CMM) calibrated to ISO 10360-2 verification standards to confirm dimensional accuracy on every piece before it leaves the bench. Production takes 7–10 working days for standard orders, or 3–4 weeks for specialist finishes including gold leaf gilding and multi-layer LED assemblies.

Delivery & Installation

Your finished plate is packaged in a rigid, foam-lined shipping crate designed to prevent surface damage in transit. We ship via tracked courier to all USA mainland addresses, with next-day and international options available. Every order includes a precision-drilled mounting template, stainless steel fixings, and a printed installation guide or you can book our professional fitting service.

Delivery & Shipping Information

We manufacture every plate to order, so please allow the following production and delivery times.

Hand Painting & Gilding

  • Standard Orders (engraved wood, metal, acrylic): 7–10 working days
  • Specialist Finishes (gold leaf gilding, multi-layer LED, bespoke shapes): 3–4 weeks
  • Rush Orders: Available on request. Contact us for availability and pricing.

Our Quality Guarantee & Returns

Every plate leaves our workshop inspected against a 12-point quality checklist verified using a digital surface roughness tester calibrated to ISO 4287 surface texture measurement standards. If your plate arrives damaged or does not match your approved proof, we will remake and reship it at no cost. Please report any issues within 48 hours of delivery with photographs so we can resolve them immediately. Due to the bespoke nature of personalised products, we are unable to accept returns for change of mind, a policy consistent with the Consumer Contracts Regulations 2013 exemption for made-to-order goods.

Why Choose Get Your Name Plate

Precision-Crafted Quality

Every plate is individually fabricated in our Sacramento workshop using industrial-grade CNC routing, laser engraving, and waterjet cutting equipment. We do not resell mass-produced imports. Each piece passes through a multi-stage quality verification process using a digital coordinate measuring machine (CMM) and surface profilometer, ensuring dimensional accuracy and finish consistency that meets the tolerances specified in ISO 2768-1 general purpose linear dimension standards.

Weather-Tested & Built to Last

All exterior plates are tested and rated for long-term outdoor exposure. Our wood panels are sealed to ASTM B117 salt-spray resistance standards. Our stainless steel is passivated to ASTM A967. Our acrylic is UV-stabilised to ISO 7823-1. We stand behind every plate with a 10-year weather resistance guarantee if your plate fades, cracks, or corrodes within a decade of installation, we will replace it free of charge.

Made to Order, Shipped to Your Door

There is no warehouse, no inventory, and no generic designs. Every plate is built from raw material to finished product specifically for your property. From the moment you approve your proof to the moment your tracked parcel arrives, our team manages every step cutting, engraving, finishing, packaging, and shipping so you receive a truly one-of-a-kind entrance marker.

Get Your Custom Sign Started Today

Starting is free. Tell us your idea and we will send you a design preview to look at. No payment needed to see your preview.
Call Now
Free Estimate

Frequently Asked Questions

What materials create an authentic rustic farmhouse house sign?
Reclaimed barn wood is the cornerstone material of genuine boards with natural knots, dents, and grain variations. Pair with hand-welded or plasma-cut wrought iron lettering for textural contrast. The iron must be treated with a rust-inhibiting powder coat to BS EN ISO 12944-5 C3 standards, and the wood sealed with an exterior-grade penetrating stain.
The chippy paint technique involves applying a base stain, adding a contrasting paint layer, then lightly sanding corners with 120-grit sandpaper to reveal the wood beneath. Alternatively, a vinegar-and-steel-wool solution accelerates natural wood oxidation to replicate decades of barn weathering within hours, a finish-ageing method documented in traditional woodworking manuals.
Yes, wrought iron is a traditional farmhouse material prized for hand-forged character. However, raw iron rusts rapidly outdoors. Insist on high-quality powder-coating verified to BS EN ISO 12944-5 C3 protection standards. For a deliberate controlled patina look, apply clear matte polyurethane sealer after the desired rust colour develops to freeze the oxidation.
For a front-porch welcome sign, choose a height approximately two-thirds to three-quarters the height of your entry door. A standard 80-inch door pairs best with a 48–54 inch vertical sign measured with a calibrated tape measure. Oversized signs overwhelm small porches and always map your wall space with painter’s tape before ordering.
Scroll to Top